铜川 GE DS3800HPBD1D1C 驱动器 模拟 I/O 板

铜川 GE DS3800HPBD1D1C 驱动器 模拟 I/O 板

产品描述

该DS3800HPBD1D1C在通用电气（GE）的Mark IV Speedtronic Turbine系列中具有特色。

DS3800HPBD1D1C很容易用一对夹子和几个螺丝连接。沿一个边缘有一个大电源端口。大约有二十种不同颜色和大小的不同二极管。还有两个红灯或LED。有一个小的银色拨动开关。

DS3800HPBD1D1C还有几对金属销。这些金属引脚称为跳线端口。跳线端口带有一些黑色盖子。盖子允许操作员全面调整能量电流。还有一些小电线可以帮助能量在电路板周围流动。该板可以使用现有的二十个EPROM重新编程。EPROM拥有DS3800HPBD1D1C的一些节目，并具有更新和更改的能力。DS3800HPBD1D1C的其余程序在EEPROM中举行，EEPROM是恒定的，无法更改。

如有必要，可以在标有“SPARE”的空间中添加额外的EEPROM或EPROM。电路板上的每个组件都有一个单独的字母数字标记，用于识别目的。还显示零件号和公司徽标，以及电路板的组装位置。沿着棋盘的一个边缘，它被标记为 A 到 I，每个字母之间都有小箭头。

铜川 GE DS3800HPBD1D1C 驱动器 模拟 I/O 板

Product description

The DS3800HPBD1D1C is featured in the General Electric (GE) Mark IV Speedtronic Turbine series.

The DS3800HPBD1D1C is easily connected with a pair of clips and a few screws. There is a large power port along one edge. There are about twenty different diodes of different colors and sizes. There are also two red lights or leds. There's a little silver toggle switch.

DS3800HPBD1D1C and several pairs of metal pins. These metal pins are called jumper ports. Jumper ports with some black covers. The cover allows the operator to fully adjust the energy current. There are also small wires that help the energy flow around the board. The board can be reprogrammed using twenty existing EPROMs. EPROM has some programs of DS3800HPBD1D1C with the ability to update and change. The rest of the program of DS3800HPBD1D1C is held in the EEPROM, which is constant and cannot be changed.

If necessary, you can add additional EEPROM or EPROM in the space labeled "SPARE". Each component on the board has a separate alphanumeric marker for identification purposes. The part number and company logo are also displayed, along with where the board is assembled. Along one edge of the board, it is labeled A through I, with small arrows between each letter.