GE DS3800HRDA1C1C 涡轮调节器电路板 有效运行所需的所有材料

GE DS3800HRDA1C1C 涡轮调节器电路板 有效运行所需的所有材料

产品描述

DS3800HRDA1C1C是由通用电气（GE）创建的涡轮调节器电路板。 该DS3800HRDA1C1B在通用电气的Speedtronic Mark IV系列中具有特色。 该DS3800HRDA1C1C大约有三十个EPROM和EEPROM。EPROM和EEPROM包含DS3800HRDA1C1C高效运行的所有材料。EEPROM 拥有已建立的程序蓝图类型，无法更改。

另一方面，EPROM可以根据需要进行调整。有一个标有“SPARE”的部分，其中可以连接额外的EPROM或EEPROM。DS3800HRDA1C1C包含四个深色外壳，每个外壳容纳四个红色发光二极管（LED）。

DS3800HRDA1C1C还有两个没有外壳的黄色LED。有三十多个橙色的透明二极管，十八个球形灰色二极管，近三十个海绿色二极管，五个天蓝色二极管和五个笨重的金属二极管。该板与其他电路板连接，并包括一系列接触插头。在DS3800HRDA1C1C的一侧附近，有两个男性化的码头。底座的对比大小一个是微型的，而另一个是长的，并且运行板的范围。

DS3800HRDA1C1C还有一个女性化的码头，将木板的范围延伸到更大的男性码头对面。要在连接所有必要的线束后连接DS3800HRDA1C1C， 只需两个微小的螺钉来稳定电路板并将两个塑料夹卡入到位.还有大约八十个电阻器。电阻器具有不同的颜色标签，以显示它们可以处理和帮助循环的能量。电路板的每一点都经过表征和编码。它还具有通用电气（GE）的标志和产品编号（DS3800HRDA1C1C）。

GE DS3800HRDA1C1C 涡轮调节器电路板 有效运行所需的所有材料

Product description

The DS3800HRDA1C1C is a turbine regulator circuit board created by General Electric (GE). The DS3800HRDA1C1B is featured in General Electric's Speedtronic Mark IV series. The DS3800HRDA1C1C has about thirty EPROMs and EEPROMs. EPROM and EEPROM contain all materials for efficient operation of DS3800HRDA1C1C. EEPROM has an established program blueprint type that cannot be changed.

On the other hand, the EPROM can be adjusted as needed. There is a section labeled "SPARE" where additional EPROM or EEPROM can be connected. The DS3800HRDA1C1C contains four dark housings, each housing four red light emitting diodes (leds).

DS3800HRDA1C1C also has two yellow leds without case. There are more than thirty orange clear diodes, eighteen spherical gray diodes, nearly thirty sea green diodes, five sky blue diodes, and five bulky metal diodes. The board is connected to other circuit boards and includes a series of contact plugs. Near one side of DS3800HRDA1C1C, there are two masculine piers. The contrast size of the base is one is miniature, while the other is long and runs the range of the board.

The DS3800HRDA1C1C also has a feminine dock that extends the reach of the planks across from the larger male dock. To connect the DS3800HRDA1C1C after connecting all the necessary wiring harnesses, only two tiny screws are needed to stabilize the board and snap the two plastic clips into place. And about 80 resistors. Resistors have different color labels to show how much energy they can handle and help cycle. Every bit of the board is characterized and coded. It also bears the General Electric (GE) logo and product number (DS3800HRDA1C1C).