GE DS3800HSQD1G1D 高电平隔离板 可编程中断控制器

GE DS3800HSQD1G1D 高电平隔离板 可编程中断控制器

GE 低 HP 序列板DS3800HSQD1G1D设计为每个角上都有一个孔，用于插入螺钉以将板固定在驱动器中。GE 低 HP 序列板DS1HSQD3800G1D还配备了 1 个 2 针连接器和 40 个带固定杆的 1 针连接器，用于固定带状电缆。该板还装有 20 针连接器和 50 个 1 针连接器。该板还装有 20 个可擦除可编程只读存储器 （EPROM） 模块和 1 个琥珀色指示灯 LED 和 1 个红色指示灯 LED。

GE 低 HP 序列板上的红色指示灯 LED DS3800HSQD1G1D为操作员或技术人员提供了一种监控驱动器活动的方法。当红色指示灯 LED 熄灭时，电路上没有发生任何活动。每个 LED 都与电路板上的电路相关联。活动发生时，红色指示灯 LED 闪烁。

每个红色指示灯 LED 都有一个与之关联的 ID。ID 以 CR 为前缀。前缀后跟一个数字。其中一些 ID 是 CR1、CR3 和 CR5。ID印在电路板的表面上。这些 ID 对于理解每个 LED 的含义非常有用。每个 LED 的定义在描述电路板的印刷材料中提供。有关开发板的信息有一个表格，描述了每个 LED 闪烁时指示的内容。

GE DS3800HSQD1G1D 高电平隔离板 可编程中断控制器

The GE Low HP sequence board DS3800HSQD1G1D is designed with a hole in each corner for inserting screws to secure the board in the drive. The GE low HP serial board DS1HSQD3800G1D also comes with 1 2-pin connector and 40 1-pin connectors with fixed rods for securing ribbon cables. The board is also equipped with 20-pin connectors and 50 1-pin connectors. The board is also equipped with 20 erasable programmable read-only memory (EPROM) modules and one amber LED and one red LED.

The red indicator LED DS3800HSQD1G1D on the GE Low HP sequence board provides a way for operators or technicians to monitor drive activity. When the red LED is off, no activity occurs on the circuit. Each LED is associated with a circuit on a circuit board. When the activity occurs, the red indicator LED flashes.

Each red LED has an ID associated with it. The ID is prefixed with CR. The prefix is followed by a number. Some of these ids are CR1, CR3, and CR5. The ID is printed on the surface of the board. These ids are useful for understanding the meaning of each LED. The definition of each LED is provided in the printed material describing the board. Information about the development board has a table that describes what each LED indicates when it flashes.