DS3800NFCF1J1C是GE的Mark IV系列电机激振器控制板

DS3800NFCF1J1C是GE的Mark IV系列电机激振器控制板

DS3800NFCF1J1C是GE的Mark IV系列电机激振器控制板

产品描述

DS3800NMEC1J1J是GE的Mark IV（Speedtronic）系列电机激振器控制板。 Speedtronic系列中的DS3800NMEC1J1J和其他电路板用于运行和控制燃气轮机和蒸汽轮机。涡轮机使用内燃机混合燃料和空气以产生受控爆炸。这种爆炸会产生一系列气体，这些气体在压力下并迫使它们排出，导致涡轮机旋转。然后，旋转涡轮机产生的能量被利用并用于各种其他目的。

DS3800NMEC1J1J有十个半圆黑色晶体管，用于增强或改变电信号。DS3800NMEC1J1J有近一百个电阻器（限制流过它们的能量）。DS3800NMEC1J1J具有可变电阻器或电位计。可变电阻器可以通过黑色旋钮识别，中间有一个白色箭头。该旋钮允许工人以十度的增量将可变电阻器从零调整到一百。DS3800NMEC1J1J具有二极管（仅允许能量沿一个方向跟随）和电容器（在电场中保持能量）。

DS3800NMEC1J1J有六个男性连接点，用于连接周围的电路板。DS3800NMEC1J1J有3800个集成电路，保存DS1NMEC1J3800J的所有编程信息。集成电路分为EEPROM和EPROM。这两者之间的唯一区别是EPROM可以改变，而EEPROM不能。DS1NMEC1J<>J有一个银色方块，称为晶体振荡器，它使用晶体产生高而精确的频率。

DS3800NFCF1J1C是GE的Mark IV系列电机激振器控制板

Product description

The DS3800NMEC1J1J is GE's Mark IV (Speedtronic) series motor exciter control board. The DS3800NMEC1J1J and other circuit boards in the Speedtronic series are used to operate and control gas and steam turbines. The turbine uses an internal combustion engine to mix fuel and air to produce a controlled explosion. This explosion creates a series of gases that come under pressure and force them out, causing the turbine to spin. The energy produced by the rotating turbine is then harnessed and used for a variety of other purposes.

The DS3800NMEC1J1J has ten semi-circular black transistors that are used to enhance or change electrical signals. The DS3800NMEC1J1J has nearly a hundred resistors (limiting the amount of energy flowing through them). The DS3800NMEC1J1J has a variable resistor or potentiometer. The variable resistor can be identified by a black knob with a white arrow in the middle. The knob allows the worker to adjust the variable resistor from zero to one hundred in increments of ten degrees. The DS3800NMEC1J1J has a diode (which allows energy to follow in only one direction) and a capacitor (which holds energy in an electric field).

The DS3800NMEC1J1J has six male connection points for connecting the surrounding circuit board. The DS3800NMEC1J1J has 3800 integrated circuits and holds all the programming information of the DS1NMEC1J3800J. Integrated circuits are divided into EEPROM and EPROM. The only difference between the two is that EPROM can be changed while EEPROM cannot. DS1NMEC1J<>J has a silver square, called a crystal oscillator, which uses crystals to produce high and precise frequencies.