269PLUS-W-100P-120 伺服驱动器

269PLUS-W-100P-120 伺服驱动器

269PLUS-W-100P-120 伺服驱动器

产品描述

Multilin 269 PLUS 系列的 100PLUS-W-120P-269 是通用电气电机管理继电器传统系列的一部分，专为保护三相交流电机及其相关机械系统而设计。这些继电器有高压和低压两种型号，具有多种 RTD 输入传感器选项。

通用电气的 269PLUS-W-100P-120 带有 100 欧姆铂 RTD，采用银合金继电器触点，在 5 mA 时最小允许负载为 12 VDC 或 100 VDC。相电流输入和接地故障电流输入的采样时间为2 ms。

高压 269 PLUS 继电器的控制功率范围为 90 至 300 VDC 和 80 至 265 VAC。这些GE Multilin继电器可以由交流或直流电源供电，如果控制电源输入超过3 V，则使用外部250 A保险丝（额定到所需电压）。这些控制功率范围包括容差。

269PLUS-W-100P-120 继电器带有八条标准过载曲线，但是，如果其中一条曲线不合适，则可以通过输入新断点并创建自定义过载曲线来配置新曲线。269 PLUS 继电器的检测水平为初级 CT 放大器的 ±1%，跳闸时间精度为 ±1 秒至 13 秒，跳闸时间为 8 秒跳闸时间的 ±13%。

269PLUS-W-100P-120 伺服驱动器

Product description

The 100PLUS-W-120P-269 of the Multilin 269 PLUS series is part of GE's legacy family of motor management relays designed to protect three-phase AC motors and their associated mechanical systems. These relays are available in high and low voltage models with a variety of RTD input sensor options.

Ge's 269PLUS-W-100P-120 comes with a 100 ohm platinum RTD, uses silver alloy relay contacts, and has a minimum allowable load of 12 VDC or 100 VDC at 5 mA. The sampling time of phase current input and ground fault current input is 2 ms.

The high voltage 269 PLUS relay has a control power range of 90 to 300 VDC and 80 to 265 VAC. These GE Multilin relays can be powered by AC or DC power, using an external 250 A fuse (rated to the desired voltage) if the control power input exceeds 3 V. These control power ranges include tolerances.

The 269PLUS-W-100P-120 relay comes with eight standard overload curves, but if one of them does not fit, you can configure a new curve by entering a new breakpoint and creating a custom overload curve. The 269 PLUS relay has a detection level of ±1% of a primary CT amplifier, trip time accuracy of ±1 second to 13 seconds, and trip time of ±13% of an 8-second trip time.